Télécharger Imprimer la page

gomag GO-SK 2.0 Traduction Du Mode D'emploi Original page 25

Publicité

Les langues disponibles
  • FR

Les langues disponibles

9
Electrical connection
The electrical motor installed is connected and ready for operation. The connection com-
plies with the applicable VDE and DIN provisions. The customer's mains connection as
well as the extension cable used must also comply with these regulations.
9.1
Important information
If the battery overheats, the charging process is terminated and the battery charger is switched
off. After the battery has cooled down, the charging process can be resumed.
Connection type Y
If it is necessary to replace the mains connection cable, this must be done by the manufacturer
or their representative to avoid safety hazards.
10 Cleaning
WARNING
Unplug the plug from the socket before carrying out any work on the battery charger.
• Clean the product with a dry cloth or brush.
• Do not use water or metallic objects.
11 Maintenance
The product is maintenance-free.
12 Storage
1.
Remove the battery from the product before prolonged storage (e.g. winter storage).
2.
Clean and check the product for damage.
3.
Store the battery in a partially charged state.
4.
When stored, check the battery charge level every three months.
5.
Recharge the battery if necessary.
Store the battery in a dark, dry and frost-free place that is inaccessible to children.
The optimum storage temperature lies between 0 °C and 45 ˚C.
Store the product in its original packaging.
13 Ordering spare parts
Spare parts / accessories
GO-ABP 2.0 battery item no.:
GO-ABP 4.0 battery item no.:
www.scheppach.com
7909201714
7909201715
GB | 25

Publicité

loading

Ce manuel est également adapté pour:

7909201725