Publicité
Les langues disponibles
Les langues disponibles
USB-C 30W WALL CHARGER + CABLE
Ref: KO051658
CHARACTERISTICS
•
Input voltage: 100-240V AC 50/60Hz 1A
•
Output voltage:
5.0VDC/3A, 9.0VDC/3A, 12.0VDC/2.5A, 15.0VDC/2A, 20.0VDC/1.5A
•
Power: 30W max
•
Cable current: 3A
•
Cable lenght: 1,20m
PACKAGING CONTENT
•
A USB-C wall charger
•
A USB-C/Lightning cable
•
A user manual
WARNINGS & SAFETY INSTRUCTIONS
•
Do not short-circuit.
•
Make sure that the correct voltage is used, as prolonged excessive voltage
may damage your device.
•
Do not attempt to use this power supply with any device requiring more
than the rated output power.
•
Do not attempt to open the charger.
•
Remove this charger from the mains when not in use.
•
Always switch off your device before connecting/disconnecting it from the
charger.
•
The power socket must be installed near the equipment and must be easily
accessible.
It is also recommended to :
•
Charge your electrical or electronic devices outside of wet rooms.
•
Do not use a plugged-in electrical device, including a waterproof and water-
resistant telephone, in the bathtub or shower.
•
Do not handle a plugged-in electrical device with wet hands or feet, or with
feet in water.
Guarantee
The products are guaranteed not to fail due to manufacturing defects. This warranty does not
cover defects due to misuse or normal wear and tear, so please keep your invoice attached to
this guide.
Double-insulated equipment. This symbol means that this appliance has reinforced
insulation with no accessible metal parts. The plugs of class 2 equipment do not have
This symbol means that this device is for indoor use only.
This socket must be installed close to the equipment and must be easily accessible.
This product meets the highest energy efficiency standards.
PRODUCT USE
Ready-to-use kit to optimally charge your device by adjusting the charging power.
Short circuit and overload protection.
CHARGING YOUR DEVICE
Important:
First check the compatibility of the voltage with your device.
1. Before use, check the input voltage of your device and the output voltage of this
charger, if they can match. Make sure that the total load does not exceed the rated
output current of this charger.
2. Connect your device and the USB-C port of this adapter via the included charging
cable.
3. Plug this charger into a wall outlet (100-240V AC). The built-in switch automatically
adjusts the voltage.
4. This charger will detect the best charging mode and start charging your device
automatically.
5. Your digital device should then indicate the charging mode.
6. Unplug your digital device when not in use.
7. Unplug this charger from the wall socket when not in use.
Directive 2012 / 19 / EU
Correct disposal of this produt
Electronic waste should not be thrown away with household waste. Please recycle them to your authorized
agency and check the recycling advice with the relevant local authorities.
SRDi declares that the product «USB-C 30W wall charger + cable» is in conformity with directives 2014/30/EU & 2014/35/EU & 2011/65/EU.
The full EU Declaration of Conformity is available on our KeyOuest website at: www.keyouest.fr
2023/03V01/MKG
SRDi - 85430 La Boissière des Landes FRANCE
Publicité
