Sav Beau Rivage GASAMO5BS01 Notice De Montage page 27

REF: GASAMO5BS01
SKU: SAMOA
Modications to the appearance linked to the use of the product and natural wear:
-
Softening of foams, sagging of leather, fabrics and microbres
-
Wear, tearing and dirtying of the covers
-
Natural change in colours, varnish and woodwork over time
MANUFACTURING TOLERANCES
The dimensions, samples of fabric, leather and wood nishes in your possession are solely provided for the purposes of infor mation. We cannot ensure a similarity of colours and
appearance on deliveries with respect to samples.
For the matching of fabric, leather or wood nishes, we cannot ensure the same colour base. Any difference in appearance cannot be the subject of a complaint.
GETTING A GOOD AND LONG LIFE OUT OF YOUR PRODUCT REQUIRES COMPLIANCE WI TH A FEW SIMPLE AND COMMON -SENSE RULES SUCH AS
-
Not leaning/sitting on the parts of the product that are not intended for this purpose and not leaning/sitting abruptly by allowing yourself to fall.
-
Not moving the product by pulling on the front.
-
Not exposing the product to the sun, the moon and any excessive source of light and heat.
-
Avoiding excessively humid atmospheres: the coverings and/or the structures can then expand/deteriorate excessively.
-
Not unsuitably handling the accessories of the products
-
Ensure as much as possible that all the seats on the product are used equivalently in order to maintain homogeneous comfort as a whole.
In use, the product will soften thus giving its maximum comfort. It is normal for modications due to use of the product to appear over time.
PRECAUTIONS FOR PROLONGED USE
-
Observe the maintenance precautions indicated in this manual
-
Furniture fabric requires regular care because it is constantly exposed to dust and dirt.
-
Do not wait for the covering to become very dirty before cleaning it.
-
Regular dusting with a vacuum cleaner in particular (equipped with an armchair brush) is recommended.
IN CASE OF A STAIN
-
Acting quickly is a determining factor in order to obtain good results. Sponge wet stains using an absorbent cloth by blotting it.
-
Never apply a cleaning product directly on a product covering; instead soak a white and clean cloth or a sponge.
-
Always rst test the action of the product on a non-visible part of the seat and then after verication, remove the stain with the soaked cloth by rubbing from the edge to the
middle.
-
Do not use abrasive cleaning products to clean your product.
WARRANTY
5
Page 27