Publicité
Konformitätserklärung
Wir erklären in alleiniger Verantwortung, daß dieses
Produkt mit den folgenden Normen oder normativen
Dokumenten übereinstimmt: EN 60974-1, gemäß den
Bestimmungen der Richtlinien 2006/95/EG.
English
Inverter welding machine
Technical specifi cations (fi g. 1)
Product elements (fi g. 2)
1. Electrode holder
2. Earth terminal
3. Adjustment wheel for welding current
4. Selector switch
5. Control lamp for overheating
6. Strap
7. Power cable
SAFETY INFORMATION
Read all safety warnings and all instructions.
IMPORTANT
Only use this appliance for the purpose for which it is
designed and as described in these instructions: Manual
arc welding with coated electrodes.
Handling this system incorrectly may be hazardous for
persons, animals and property. The user of this system is
responsible for his/her own safety and for the safety of
others.
Read these operating instructions and follow all the
regulations.
• Repairs and/or maintenance work may only be carried
out by qualifi ed personnel.
• Use only the welding cables supplied.
• Ensure that the appliance is looked after properly.
• To ensure that suffi cient air can be drawn in through the
ventilation slits, the appliance should not be constricted or
placed next to a wall while it is operating. Make sure that
the appliance is correctly connected to the mains supply
(see 6.). Do not subject the mains lead to any tensile stress.
Unplug the appliance before you change its position.
• Check the condition of the welding cables, the electrode
tongs and the earth terminals; wear on the insulation and
the live parts may result in dangerous conditions and
reduce the quality of the welding work.
• Arc welding generates sparks, molten metal particles
and smoke, so the following is required: Remove all
infl ammable substances and/or materials from the
working area.
• Ensure that there is adequate ventilation.
• Do not weld on tanks, vessels or pipes that have
contained infl ammable liquids or gases. Avoid all direct
contact with the welding circuit; the idling voltage
between the electrode tongs and the earth terminal may
be dangerous.
• Do not weld in dusty places.
• Do not store or use the appliance in wet or damp
conditions or in the rain.
• Protect your eyes with specially designed goggles (DIN
level 9-10), which you can attach to the supplied safety
shield. Wear gloves and dry safety clothing that are not
contaminated by any oil or grease to ensure that your skin
is not exposed to ultraviolet radiation from the arc.
6
Publicité
