D-Link DIR-878 Guide D'installation Rapide page 6

5
Plug the power adapter into your router and connect to an available
power outlet or surge protector. If the Power LED does not light up, press
the Power button on the back of the router.
Modem
After the router has powered up, verify that the Power and Internet LEDs are
6
both lit. Proceed with router configuration.
Configuration
There are two ways to configure your router:
A. Web Browser - Use a web browser from your computer.
B. QRS Mobile app - Use a mobile device with the D-Link QRS Mobile app.
Refer to the QRS Mobile Setup section for more information.
A. Web Browser Configuration
Open a web browser (e.g. Internet Explorer, Chrome, Firefox, or Safari)
1
and enter http://dlinkrouter.local./ or the IP address of the router
(http://192.168.0.1).
6
1 2 3 4
- • +
4 3 2 1 INTERNET RESET WPS WiFi 12V. . . 1.5A POWER
DIR-878
INTERNET 12V --1.5A POWER WPS
Computer
Wireless
Computer