OM SYSTEM M.ZUIKO DIGITAL ED12-40mm F2.8 PRO II Mode D'emploi page 5

EN INSTRUCTIONS
Thank you for purchasing this product.
To ensure your safety, please read this
instruction manual before use, and keep it
handy for future reference.
Name of parts
1 Lens hood
2 Focus ring
3 Zoom ring
4 Mount index
Focus ring
Slide to change the focus method (Fig. 1)
(manual focus clutch mechanism).
• Position in which distance indicator
cannot be seen (Fig. 1-A)
The lens will operate in the focus mode set by
the camera.
• Position in which distance indicator can be
seen (Fig. 1-B)
The lens will operate in the MF mode,
regardless of the focus mode set by the
camera.
Focus by rotating the lens focus ring.
5 L-Fn button
6 Electrical contacts
7 Distance indicator
L-Fn button
The AF stops functioning while the button is
pressed.
You may be able to assign other functions
depending on your camera. For details, see the
instruction manual that came with your camera.
Attaching the hood (Fig. 2)/
Storing the hood (Fig. 3)
To remove the hood, rotate it while pressing the
release.
Notes on Shooting
• If autofocus (AF) is unavailable, check the
sliding position of the focus ring.
• Edges of pictures may be cut off if more than
one filter is used or if a thick filter is used.
• When using a flash, flash light may be blocked
by the lens body, lens hood, etc.
• The focus distance may change when the
focusing method is switched from MF to AF/
MF and then back to MF. Readjust the focus
distance.
• The distance indicator is intended as a guide
only.
• Do not touch electric contacts on cameras.
7
EN