Publicité
Hardware Usage Guide
HOW TO USE A TWIST-LOCK
1.
Push a TWIST-LOCK® FASTENER
into the large hole in the part.
2.
1. Insert the dowel end of the FASTENER into the
hole of the adjoining part.
NOTE: The dowel end of the FASTENER must
remain fully inserted in the hole of the adjoining
part while locking the FASTENER.
2. Tighten the FASTENER with a Phillips
screwdriver as tight as possible.
Page 8
FASTENER
®
Dowel end
427428
www.sauder.com/commercial-office/service
Publicité
Manuels Connexes pour Sauder OFFICE WORKS 427428
Produits Connexes pour Sauder OFFICE WORKS 427428
- Sauder Office Works AFFIRM 426274
- Sauder OFFICE WORKS AFFIRM 431766
- Sauder Office Works AFFIRM 427450
- Sauder OFFICE WORKS AFFIRM COLLECTION 427471
- Sauder OFFICE WORKS AFFIRM 426277
- Sauder OFFICE WORKS AFFIRM COLLECTION 427414
- Sauder Office Works AFFIRM 427468
- Sauder OFFICE WORKS Bowfront Executive 427445