Publicité
Les langues disponibles
Les langues disponibles
LUBRICATION
Prior to each use, make a habit of checking the pump oil level. Most direct-
drive air compressors have a dipstick with casting marks that indicate the minimum
and maximum acceptable levels of oil. Always maintain the oil level at the maximum
mark on the dipstick or to 2/3 full in the sight gauge
Do not operate the pump with an inadequate or excessive amount of oil. The
cost of failures which occur due to incorrect oil levels will not be covered under
warranty.
DO NOT USE A DETERGENT OIL!
NOTE: Unit must be level when in operation
OIL CHART
- 12 -
Publicité
