LENCO PBC-20 Mode D'emploi page 10

▪ The USB cable is not compatible.
2. Why some digital products can't be charged?
The charging voltage of device must be DC 5V.
The charged device is not compatible with the PBC-20.
F. Specfication
Dimension
Weight
Battery
Power Source
Charging time
Operating Temperature 0 to 45°C
G. Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
described in this guide for illustration purposes only and may not apply to
particular situation. No legal right or entitlements may be obtained from
the description made in this manual.
H. Disposal of the Old Device
This symbol indicates that the relevant electrical product or
battery should not be disposed of as general household waste
in Europe. To ensure the correct waste treatment of the
product and battery, please dispose them in accordance to any
applicable local laws of requirement for disposal of electrical
equipment or batteries. In so doing, you will help to conserve
natural resources and improve standards of environmental
protection in treatment and disposal of electrical waste (Waste Electrical
and Electronic Equipment
I. CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB
Nuth, The Netherlands, declares that this product is in
compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via
techdoc@commaxxgroup.com
J. Service
143.5mm (H) x 113.5mm (W) x 50.5mm (D)
Approx. 160g
Cylinder Lithium-ion battery 3.7V, 2200mAh
DC Input: 5V 1A
DC output 1: 5V 0.5A
DC output 2: 5V 1A
Approx. 3 hours (1A adaptor, standard cable)
Directive).e
10