Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions
below to see if you can solve the problem before calling for service.
PROBLEM
Appliance does not operate.
Temperature inside the appliance is too warm.
Temperature inside the appliance is too cold.
Vibrations.
Moisture forms on inside appliance walls.
Moisture forms on outside of appliance.
The door will not close properly.
POSSIBLE CAUSE
¨
Not plugged in.
¨
The circuit breaker tripped or a blown fuse.
¨
Temperature control is set too warm.
¨
Turn the control to a cooler setting and allow several hours
for the temperature to stabilize.
¨
Door is kept open too long or is opened too frequently.
¨
Warm air enters the appliance every time the door is opened.
¨
Open the door less often.
¨
The door is not closed completely.
¨
The door gasket does not seal properly.
¨
The appliance has recently been disconnected for a period of
time.
¨
Four hours are required for the appliance to cool down
completely.
¨
Temperature control is set too cold.
¨
Turn the control to a warmer setting and allow several hours
for the temperature to stabilize.
¨
Check to assure that the appliance is on a level surface.
¨
The appliance is touching the wall.
¨
Relevel the appliance and move it from the wall.
¨
If continued vibration occurs, turn off the appliance and unplug
the power plug.
¨
Contact Vissani's Customer Service Department for further
assistance.
¨
Door is slightly open.
¨
Door is kept open too long, or is opened too frequently.
¨
Open the door less often.
¨
The door is not sealed properly.
¨
Door is slightly open, causing cold air from inside the
appliance to meet warm moist air from outside.
¨
The appliance is not on a level surface.
¨
The gasket is dirty.
11
Please contact 1-877-527-0313 for further assistance.
HOMEDEPOT.COM
Publicité
