LightPro Castor Smart 200N Manuel De L'utilisateur page 4

Start immediately:
1.
Download the app
2.
Connect the Gateway
3.
Install the Zigbee products (Lightpro lights and Motion Sensor)
The Lightpro Switch and Camera are Wi-Fi based and do not need to
be paired with the Gateway. Install the products, connect them to the
app and you're done!
Note: Make sure that your WiFi router is set on 2.4GHz. If
your router is set on 5GHz, then you need to change your
network's Wi-Fi frequency to 2.4 GHz in the settings menu
of the router. Please log into your router or contact your
internet provider for this.
4
SMART
Available on