JAPANNEXT JN-V315UHDR Manuel De L'utilisateur page 6

Attention :
* Please note that the panel should be handled with care. Please be careful not to push down on
the LCD surface with your fingers or any other object from above, as there is a risk of damaging
the panel
* When installing, please be sure to handle the screws carefully to avoid dropping them.
1. Place a soft cloth on a flat and stable surface, and place the monitor screen on top with
the screen facing up.
2. Attach the stand column to the stand mounting section on the back of the monitor using the
included screws.
3. Attach the base to the stand column using the screws included with the base.
4. Make sure that the monitor and stand are securely fixed.
1. Make sure that the power of the monitor and computer is turned OFF before connecting
the cable.
2. Attach the power cable and corresponding cables (HDMI, DP) to the monitor. Attach cables
(HDMI, DP) to the computer as well.
3. Turn ON the power of the monitor and computer.
Warning: To work safely, always connect the ground wire before plugging in the power plug.
(Only if there is a ground link). Also, when disconnecting the ground connection, always unplug the power plug
from the outlet first.
Note: Connecting HDMI and DP cables simultaneously may cause malfunctions.
Connect only one cable to one computer.
6
QUICK START GUIDE
Installation
Connecting to a Computer