Publicité
Les langues disponibles
Les langues disponibles
6.
Service and repairs
All quality power tools will eventually require
servicing or replacement of parts because of wear
from normal use. To assure that only authorized
replacement parts will be used, all service and
repairs must be performed by a HITACHI
AUTHORIZED SERVICE CENTER, ONLY.
7.
Service parts list
CAUTION:
●
Repair, modification and inspection of Hitachi
Power Tools must be carried out by a Hitachi
Authorized Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed
in each country must be observed.
WARNING:
Never use any accessories other than those mentioned below.
The use of any accessories other than those mentionded below or attachments not intended for use such as
cup wheel, cut-off wheel or saw blade is dangerous and may cause personal injury or property damage.
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
Wrench (Code No. 938332Z) ................................ 1
Side Handle (Code No. 318312) ........................... 1
Depressed center wheel .................................. 1
4-1/2" (115mm) external dia. × 1/4" (6mm)
thickness × 7/8" (22.23mm) hole dia.
(Code No. 701045 or 326203) ............... G12SQ
5" (125mm) external dia. × 1/4" (6mm)
thickness × 7/8" (22.23mm) hole dia.
(Code No. 701050 or 326205) ............... G13SQ
NOTE:
Specifications are subject to change without any
obligation on the part of the HITACHI.
MODIFICATIONS:
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.
ACCESSORIES
English
13
Publicité
