Stand-Alone Operation - Ecor Pro DryFan 8 Mode D'emploi

UK
OPERATION |
CONTROLS
The controls are positioned on the front of the unit
next to the damp air inlet duct, they are:
1
1. Humidistat
2. Remote Humidistat Switch
3. Remote Humidistat Jack Plug Socket
3
2
Auto reset. If there is a power out the dehumidifier will
automatically restart when the mains power is recon-
nected.
MOUNTING
The dehumidifier can be mounted in any direction
even up-side-down.
Turn the feet out to see the anchoring points. Secure
all four feet with suitable fixings (not provived) to floor,
wall or ceiling.

STAND-ALONE OPERATION

Connect the unit to suitable mains supply and connect ducting,
Ensure the 'Remote Humidistat' switch is set to the 'OFF' position (O). Turn humidistat to lowest humidity level
continuation or set the switch to the 'ON' position (I). The fan will start. Set the humidity level right for the room
to be dried.
+
11