Ikegami CMF-1580 Mode D'emploi page 13

Using the Auto-Skip Mode
When the Auto-skip options is set in the MENU settings, and no input signals are
found for the channels 2, 4 and VCR, the Monitor will operate as follows:
Camera 1 Scanning
After 1 second
Camera 1 Scanning
After 1 second
Camera 1
(After auto-timer duration) (After auto-timer duration) (After auto-timer duration)
Camera 2 Scanning
No Input Signal
After 1 second
(After scanning 4 channels)
Camera 2 Scanning
No Input Signal
After 1 second
(After scanning 4 channels)
Camera 3
Eng-13
Camera 3 Scanning
After 1 second
Camera 3 Scanning
After 1 second
Camera 1
Camera 4 Scanning
No Input Signal
Camera 4 Scanning
No Input Signal
Camera 3