Parrot Uncle F6351110V Instructions D'installation Et D'utilisation page 4

1
2
3
4
2
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
As shown in the figure, remove the suspension ball
of the suspension rod component, and thread the
power cord of the main fan through the suspension rod
As shown in the figure, pass through the lock rod and R
lock pin, tighten the two screws on the side to make the
suspension rod perpendicular to the main fan, place the
decorative cover and suspension cup, and then tighten
the suspension ball screws (reverse installation according
1
to the previous disassembly sequence)
3
Installation & Operating Instructions for the Installation & Operating Instructions for the
Parrotuncle Owner's Installation ,Manual Parrotuncle Owner's Installation ,Manual
Take out the main fan from the packaging box,
as shown in the figure. Remove the hanging pin
and R lock pin, and use a screwdriver to loosen
the two screws on the side
F6351110V F6351110V