Publicité
safety
14. Fast moving air will stir up dust and debris which may be harmful.
Release air slowly when draining moisture or depressurizing the
compressor system.
SPRAYING PRECAUTIONS
15. Do not smoke when spraying paint, insecticides, or other
flammable substances.
16. Use a face mask/respirator when spraying and spray in a well
ventilated area to prevent health and fire hazards.
17. Do not direct paint or other sprayed material at the compressor.
Locate compressor as far away from the spraying area as possible
to minimize overspray accumulation on the compressor.
18. When spraying or cleaning with solvents or toxic chemicals, follow
the instructions provided by the chemical manufacturer.
HOSE PRECAUTIONS
19. Inspect hose before use. Do not exceed working pressure marked
on hose. Do not twist, bend knot, or abrade hose. Do not wrap
around body.
hose
20. Keep away from hot surfaces and chemicals.
Installation
INSTALLATION AND LOCATION
The compressor must be used on a stable level surface. The air
compressor must be used in a clean and well-ventilated area.
The compressor requires an unobstructed airflow and must be
located a minimum of 18 inches from any walls or other ob-
structions.
Extension Cord Length
Up to 25 Feet
26 to 50 Feet
51 to 100 Feet
&
installation
WARNING
Do not spray flammable materials in vicinity of open
flame or near ignition sources including the compres-
sor unit.
Wire Size (A.W.C.)
14
12
10
11
Publicité
