Publicité
Les langues disponibles
Les langues disponibles
STEP 1
Rough-in Requirements (see figure 3)
1. The incoming power feed goes to a deep single gang
electrical box (for the controller). This electrical box can be
located anywhere in the room, although we recommend it
be alongside your light switches.
2. A power feed then goes from the controller electrical box to
a single gang electrical box (for towel warmer). The location
of this electrical box governs the location of your towel
warmer (see figure 2).
3. Wall studs or plywood backing is required in the wall at all
bracket locations. See figure 2 for bracket locations.
Figure 1
STEP 3
Hardwire Connection (see figure 4)
Do not connect the towel warmer to the power supply until all instructions have been read and installation carried out in accord with
them. The heating element is 150W, 300W or 450W 110V. The element conforms to UL standards and the unit to CSA standards (File
ref: 229718). Ensure the CSA label is visible. TURN OFF POWER SUPPLY BEFORE PROCEEDING.
1. Feed the electrical cord located at the bottom of the towel warmer first through the round tube "G" and then through the cover
plate "F".
2. Complete all electrical connections as shown in figure 3.
3. Fit tube "G" over towel warmer element sleeve until it meets the hexagonal chrome collar.
4. Push cover plate "F" onto tube.
5. Screw cover plate to electric box with the enclosed screws. Adjust where necessary.
Towel Warmer Installation Procedure
STEP 2
Installation Instructions (see figure 1)
1. Check all items have been received. You should have
received a towel warmer, hardwire kit, programmable
controller and mounting bracket kit. Read all instructions
before continuing.
2. Fix wall supports "B" including collar "A" to the wall using
the screws provided and in locations as shown on figure 2.
3. Screw the threaded pin "C", into the threaded bushing "D"
on the back of the towel warmer.
4. Hang and adjust the towel warmer using set screws "E" to
lock pin "C" in the wall bracket "B". Ensure the towel warmer
is firmly and safely fixed.
877-757-8930
www.icobath.com
Publicité
