KLIM V8 Manuel D'utilisation page 2

ENGLISH
Thank you for acquiring our KLIM V8 laptop cooler! We hope
that you enjoy this product and that it helps you keep your
laptop at an optimal temperature.
If you need any help or if you simply want to share your
feedback, please contact us at support@klimtechnologies.com.
Our specialists reply within 24 hours!
PRODUCT SPECIFICATIONS
- Dimensions:
- Weight:
- Fan dimensions (1):
- Fan dimensions (2):
- Maximum fan speed:
- Default fan speed:
- Minimum fan speed:
- Number of fans:
- Airflow:
- Fan noise:
- Current:
- Voltage:
- Power connection:
- Compatibility:
393 x 269 x 29 mm
910 g
70 x 70 x 15 mm
80 x 80 x 10 mm
2200 ± 10% RPM (level 6)
1700 ± 10% RPM (level 3)
1450 ± 10% RPM (level 1)
8
81.3-106.8 CFM
19.5-24.3 dB
0.85A-1.4A ± 10 %
5 V
USB cable
10 to 17 inch laptops
INSTALLATION AND USE
1
Set your preferred inclination by
inserting the bracket in the slots.
Check that both sides are at the
same level.
2 2
Place the laptop on the cooling pad
and connect the USB cable to the
cooling pad and laptop. If needed,
lift the frontal tabs to keep it in place.
1
3
On/Off
Fan speed RGB lights
button
control control
On/Off button
Press the On/Off button to turn
the laptop cooler on or off.
Fan speed control
Press the +/- buttons to set the
fan speed. The default value is 3.
RGB lights control
Press the RGB button to change
the lights on the sides of the cooler.
Press and hold the RGB button to
switch off the side lights.
Note: the lights on the fans are
always on while the device is
running.