STEP 5
4
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
ameriwoodhome.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
Carefully turn the unit over on its front surface as shown.
(x32)
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
BACK
PNL
B
raw surface
Flush bottom edge of the back
panel with the bottom edge of
bottom (D).
12
4
D