clage Zip HydroTap G4 BC 100/75 Guide De L'utilisateur page 32

LCD Screen operation - Section C
IV. Booster
This function should only be considered when a Booster unit is
installed.
Note: Failing to make the correct selection for 'Booster' will eff ect
product performance.
V. Lux Sensor Calibration
Note: Perform calibration under normal light conditions
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Booster] button.
4. In the next screen, press but-
A
ton to enable the Booster.
5. Dispense hot water for 30 secs
and check the outlet hose
from the Booster is warm.
1. Press the [MENU] button for
main menu.
2. Press the [Install] button.
3. Press the [Lux Sensor Calibra-
tion] button.
4. The lights on the tap head will
fl ash to confi rm calibration.
32