Introduction - Cameo NANOSCAN 100 Manuel D'utilisation

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This device is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively applicable national accident
prevention rules and regulations. As a manufacturer, Adam Hall is obligated to notify you formally about the existence of potential health risks.
Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL)
that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid prolonged exposure to
volumes in excess of 90 dB.

INTRODUCTION

LED GOBO SCANNER
CLNSCAN100
CONTROL FUNCTIONS
2-channel 8-channel, 10-channel DMX control
Master / Slave Mode
Standalone mode
FEATURES
Mini Gobo Scanner with 10 W CW CREE LED, Colour wheel with 7 colours plus open, Gobo wheel with 7 gobos plus open, 160° PAN and
90° TILT movement, 3 DMX modes, DMX 512 control, Master/Slave operation, Standalone programs, Music control via built-in microphone,
safety eyelet and mounting bracket bracket included, operating voltage 100 - 240 V AC / 50 - 60 Hz, power consumption 25 W.
OPERATION
The Cameo NANO SCAN 100 is a DMX 512 controllable Mini LED Gobo Scanner and can be operated as Standalone device, in Master/Slave
mode and Music control mode.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.