FRAM FreshBreeze CF10435 Guide Rapide

CF10435
Installation Bulletin:
Bulletin d'installation :
Boletín de Instalación:
Estimated time of installation:
Temps estimé pour l'installation :
Tiempo estimado de instalación:
Application: Land Rover LR2, Volvo S60, S80, V70, XC60 and
Application:
XC70
Aplicación:
For more application specifics,
please refer to our catalog.
Pour obtenir plus d'information
sur les applications, veuillez
consulter notre catalogue.
Para obtener información
específica sobre la aplicación,
consulte nuestro catálogo.
U.S. Product Assistance:
Aide pour les produits aux É.-U. :
Línea de asesoría en EE.UU.
1.800.890.2075, option 2
Canada Product Assistance:
Aide pour les produits au Canada :
Línea de asesoría en Canadá.
1.800.890.2075, option 2
Mexico Product Assistance:
Aide pour les produits au Mexique :
Línea de asesoría en México:
01.800.715.4135
SOME VEHICLES MAY DIFFER SLIGHTLY. IF YOU HAVE QUESTIONS
REGARDING THIS FILTER, ITS INSTALLATION OR MORE DETAILS
SPECIFIC TO YOUR VEHICLE, PLEASE VISIT
www.framfreshbreeze.com
FOR HOW-TO VIDEOS AND ADDITIONAL INFORMATION.
CERTAINS VÉHICULES PEUVENT PRÉSENTER DES DIFFÉRENCES. SI VOUS
AVEZ DES QUESTIONS CONCERNANT CE FILTRE, SON INSTALLATION OU
DÉSIREZ OBTENIR PLUS DE DÉTAILS CONCERNANT VOTRE VÉHICULE,
VEUILLEZ VISITER LE www.framfreshbreeze.com POUR OBTENIR
DES DÉMONSTRATIONS VIDÉOS ET PLUS D'INFORMATION.
PUEDE VARIAR UN POCO EN ALGUNOS VEHÍCULOS SI TIENE PREGUNTAS
SOBRE EL FILTRO Y LA INSTALACIÓN O DESEA INFORMACIÓN EN DETALLE
PARA SU VEHÍCULO, VISITE www.framfreshbreeze.com, DONDE
ENCONTRARÁ VIDEOS INSTRUCTIVOS E INFORMACIÓN ADICIONAL.
Importado por:
FRAM Group Operations Mexico City S.A. de C.V. FRAM Group Operations Mexico City S.A. de C.V.
Carretera México-Cuautitlán km 31.5 S/N
Nave 5, Conjunto Industrial Cuautitlán.
Col. Loma Bonita
Cuautitlán, Endo. de México
MEX, C.P. 54800
Tel. 01 800 7154 135
Hecho en China
TOOLS: TOOLS: T-25 Torx wrench TOOLS:
LOCATION OF CABIN FILTER: Under the dash on the passenger side of the vehicle toward the center console.
05-13 REMOVE ALL DEBRIS IN AND AROUND FILT REMOVE ALL DEBRIS IN AND AROUND FILT REMOVE ALL DEBRIS IN AND AROUND FILTER LOCATION. ALL DEBRIS IN AND AROUND FILT
20 minutes or less
1. Open the passenger side door.
20 minutes ou moins
20 minutos máx.
2. Using the T-25 Torx wrench, remove the two screws securing the panel below the glove box (it will still be held in place
by a clip).
3. Remove the panel below the glove box from the vehicle by gently pulling the panel down until the clip is detached. Remove the
wire harness attached to this panel.
4. Once the panel is removed, remove the side kick panel on the passenger side of the center console by grabbing it at the bottom
and gently pulling it loose from the console.
5. Now gently pull back the carpet that was behind the center console panel. Once the carpet is pulled out of the way you will see
the cabin filter door.
6. Unlatch the cabin filter door and remove.
7. Remove the dirty filter by sliding it out of the housing.
8. Install the new filter.
9. Re-install the cabin filter door and secure it shut.
10. Put the carpet back in place.
11. Re-install the center console panel.
12. Re-install the panel under the glove box; make sure you reconnect the wire harness you removed.
13. Re-install the Torx screws securing the panel.
ER LOCATION.