Geberit MEPLA Serie Mode D'emploi page 29

5
After the pressing procedure, check that the Geberit pressing
jaw is fully closed.
6
Push the ends of the jaw levers together and remove the
Geberit pressing jaw from the Geberit pressfitting. Check the
pressing contour.
If a press connection has not been completely pressed – in
the event of a power cut, for example – it must be pressed
again. Corrective pressing is performed in the same way as
a normal pressing operation. Depending on the state of the
preliminary pressing, there may be considerable idle stroke
before the pressing tool engages during corrective pressing.
45035998721616267 © 12-2023
967.763.00.0(02)
EN
29