Publicité
Les langues disponibles
Les langues disponibles
Item:
LHB-EM-25W-UNV
INSTALLATION INSTRUCTIONS
Emergency Driver Installation:
Figure 1
Wiring Diagram:
Red
Line AC (24/7)
White
Neutral
Green
Ground
Black
AC Switch Line
Blue/White
White
Neutral
Test Switch:
• Emergency kit will go into emergency mode if the test switch is pressed while the main power supply is on.
The emergency kit will return to charging mode once the switch is let go.
• In emergency mode, press and hold the test button for 3 seconds. This will exit emergency mode.
LED Indicator:
• Red Steady: Charged
• Red Blinking: Charging
• Red Off: Discharging
www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
EMERGENCY DRIVER
Figure 2
Emergency Driver
Battery Pack
LED Driver
1. Open the wiring compartment on the fixture.
2. Attach the wiring compartment extension box to the
fixture. See Figure 1.
3. Make wiring connections according to the wiring
diagram.
4. Install wiring compartment extension box cover. See
Figure 2.
Red
Black
Gray
Purple
Brown
White
Test Switch/
LED Indicator
Battery Connector
Purple
Pink
Publicité
