Duronic JE304 Manuel D'utilisation page 8

1. Attach the Cone Cover to the inside of the Handle(8)
2. Place the Juice Container onto the Base Unit.
3. Next add the filter onto the juice container. The filter can be adjusted so that
you can choose how much pulp to include in your juice.
4. Select which juicing cone you need and place it on top of the filter.
Large juicing cone
Ideal for oranges and grapefruits
5. Place a cup or glass directly underneath the pouring Spout(6); when you start
juicing, this will catch the juice as it is being extracted from the fruit.
NOTE: Use a suitable size cup or glass that is a height that will ensure the
juice pours directly into it without spilling.
Tip: If you need to pause the juice flow, simply lift the spout with your finger
and it will click upwards and close. When you are ready to continue juicing,
click the spout back down and the juice will flow out again.
6. Prepare your fruit by cutting your citrus fruits in half. Place one half onto the
juicing cone.
Tip: To get more juice from your fruit, press fruit at room temperature. Roll
fruit on a table, using the palm of your hand and apply gentle pressure before
cutting it in half.
How to Use
Ideal for lemons and limes
8
Small juicing cone