Xiaomi BHR5960EU Manuel D'utilisation page 10

Error Codes
Code Message
E01 Motor overloaded
E02 Place the jar
E05 Overheated
Temperature
E10
sensor error
Communication
E11
error
Troubleshooting
Issues
Food overflows
Ingredients cannot
be blended.
Burnt food on the
jar's bo om
Ingredients not hot
a er cooking
Display does not light
up.
The display is on but
the blender is not
working.
Explanation
Motor overloaded
No jar placed on the
base
High temperature alert
from bo om
temperature sensor
Bo om temperature
sensor has a short or
broken circuit.
Power board and
display panel
communication error
Solutions
Add a proper amount of ingredients.
Add water to the proper water level.
Select the desired function according to the user manual.
Contact the a er-sale service team.
Add a proper amount of ingredients.
Do not add ingredients that are easily burnt on the jar's bo om,
like flour.
Add water to the proper water level.
Clean before use.
Select the desired function according to the user manual.
Contact the a er-sale service team.
Select the desired function according to the user manual.
Contact the a er-sale service team.
Check the power cord and make sure it is plugged in and connected to
the power supply.
Contact the a er-sale service team.
Re-select the function and press the knob to enable it.
Add water to the proper water level and restart the blender a er it
cools down.
Unplug first, then power on and follow the normal operation steps.
Contact the a er-sale service team.
09
Solution
Clean out the food in the jar a er the
power is off, and wait for the blender
to cool down before powering it on again.
A er placing the jar on the base, return
to the menu screen, and press the
cancel bu on to enter standby mode.
The blender will return to normal when the
temperature drops. Press the cancel
bu on to enter standby mode.
Contact the a er-sale service team.
Contact the a er-sale service team.