Important - Magic Bullet Kitchen Express Manuel D'utilisation

4
Place the work bowl on top
of the motor base, and turn it
clockwise to lock it in place.
NOTE: The bowl must be
locked securely in place, or
the motor will not run.
5 If needed, cut your food so it
will fit in the feed chute. Then
place food into the chute.
6
Turn the power control knob
to the ON position.
7
Always use the food pusher to
guide food through the feed
chute. NEVER place hands,
fingers, utensils, or any non-
food items into the feed chute.
8 When you are finished, turn
the knob to the OFF
Using the blender: cup and cross blade.
1
Place the motor base on a
clean, dry, flat surface, like a
counter top.
2 Add ingredients into the
Magic Bullet cup (making
sure you do NOT exceed the
MAX line).
3
Twist on the cross blade
assembly until the cup and
the blade assembly are
sealed tight.
4 Turn the sealed cup upside
down and place onto the motor
base, turning it clockwise to
8
lock the cup onto base.
9
Remove the bowl from the
base by turning it counter-
clockwise. Place bowl on
clean, dry, flat surface.
WARNING: ALWAYS wait until the blade has
stopped moving before removing the lid.
10 Remove the lid by turning it
counter-clockwise to unlock.
11
Using finger holes, carefully
remove the disc blade and
Blade is sharp,
set it aside.
handle with care.
NOTE: Always use the two
larger holes (finger holes) to
handle the blade discs.
12 Pour your food ingredients
from the bowl.
WARNING:
Never unload or pour food from bowl
without first removing the blade disc.
position.
NOTE:
The cup must be locked
securely in place, or the motor
will not run.
5 Turn the power control knob
to ON or PULSE
the motor.
WARNING: Never blend hot or carbonated
ingredients, which can pressurize the sealed
cup. Always use cool or room temperature
ingredients. Never operate for more than one
minute. The friction from the rotating blade can
heat and pressurize the vessel, causing possible
separation and personal injury.
6
When you are finished, turn
the knob to the
7
Remove the sealed cup from
the motor base by turning it
counter-clockwise to unlock.
WARNING: ALWAYS wait until the blades have stopped
moving before removing the cup from the base.
8 Turn the sealed cup right
side up (blade assembly on
top), and twist off the blade
assembly. Pour and enjoy!
Power settings.
OFF:
Power is OFF, the unit is
not running.
ON:
Continuous blending or food
processing action. The unit
stays
OFF.
WARNING:
blender on for more than one
minute!
to activate
PULSE:
Provides quick bursts of
pulsing action for more
control over the texture of
your food or drink. You must
hold the knob on
keep the unit on, otherwise
the knob will automatically
move to OFF.
Care & maintenance.
OFF position.
Cleaning the Magic Bullet Kitchen Express™ is
easy. All components, except for the motor base,
are dishwasher-safe.
STEP 1: The most important thing —
POWER OFF THE UNIT and UNPLUG
from the power outlet when it is not in use. Do not
attempt to handle the appliance until all parts have
stopped moving!
STEP 2:
To start the cleaning process, empty the
bowl, making sure little to no food scraps remain.
Disassemble all parts. Make sure the blending cup/
cross blade and work bowl are not attached to the
motor base.
STEP 3: Simply place any of the parts (except for
the motor base) on the top rack of the dishwasher
or hand wash with warm, soapy water and rinse.
NEVER use the sanitize cycle as this may warp the
cups or work bowl.
WARNING: Always be extremely careful when
handling blades, as they are very sharp.
WARNING:
To pick up and handle the blade discs,
always use the two larger finger holes in each
disc.
MOTOR BASE.
• To avoid risk of injury, NEVER attempt to clean
the actuator system on the motor base while the
Magic Bullet Kitchen Express™ is plugged in.
• Do not attempt to remove any pieces from the
motor base.
• Use a sponge or damp cloth to wipe down the
motor base until clean.
ON until you switch to
If necessary, you may use a small brush to scrub
the actuator system area to ensure it is clean (dried
food particles can prevent the tabs from working
Never leave the
properly).
WARNING:
Never submerge the motor base in
water or any other liquid.
!

IMPORTANT

Signals that it's about time to buy a new blade: in
case of a bad smell, louder noise during blending,
PULSE to burning air (may also be novelty after purchase),
or if the machine does not start (which can also be
caused by sticking of the actuator system on the
motor base.
ALWAYS
the motor base
9