HAMPTON BAY GC-41021B-SST Guide D'utilisation Et D'entretien page 5

(continued)
Assembly
3
Attaching the T-shaped base
□ Attach the T-rock (E) to the finished frame with four M8 x 3 5 mm
hex bolts (CC) in the order of bolts (CC), M8 washers (DD), rectangular
steel plates (G ), chair seat (A), T-rock (E), rectangular steel plates (G ),
M8 washers (DD), M8 spring washers (EE) and M8 nuts (F F ).
□ Tighten all M8 x 3 5 mm bolts (CC) with M6 - M8 hex wrench (H H ).
NOTE: Please ensure all bolts are aligned and assembled
correctly. Fully tighten bolts with M8 wrench (HH).
Ｅ Ｅ
4
Connecting the chair base to the
chair buck et
□ I nsert the chair buck et into the chair base. The chair
is ready for use.
Ｆ Ｆ Ｆ Ｆ
ＥＥ Ｅ
Ｄ Ｄ Ｄ
Ｇ Ｇ
ＤＤ Ｄ
CC
5
Ｆ Ｆ