Home Decorators Collection HAZELTON HZAGM3030 Manuel D'entretien Et D'utilisation page 4

Installation
1
Preparing the wall
NOTE:
It is best to nd a stud in your wall to ensure
the mirror hangs securely.
□ Place the mirror (A) against the wall and determine your
desired hanging location. Using a pencil, mark two
locations on the wall that match up with the mirror's (A)
pre-attached mounting hooks.
□
Ensure the marks are horizontally straight by using
a level.
□
Use a hammer to gently punch the anchor (AA) halfway
into the wall at each marked location. Finish screwing
in the anchors (AA) with the screwdriver.
□
Using the screwdriver, insert the screws (BB) into the
anchors (AA), leaving approximately 1/8 in. of the screw
revealed.
X
AA
X
BB
2
Hanging the mirror
□ Hold the mirror (A) in place against the wall and line up the
mounting hooks with the screws (BB).
□
Loop the mounting hooks over the scews (BB) to hang the
mirror.
A
4