avantor VWR MD 8000 L Mode D'emploi page 5

MD 8000 L
Display (example: pH measurement)
3
2
1
AutoCal TEC
HOLD AR
i
Jack field /connections
Initial
commissioning
ba77216y02 05/2021
All manuals and user guides at all-guidesbox.com
01.11.2018
USB output
08:00
1 2
1 Insert the supplied batteries.
Make sure that the poles are in the correct position.
2 Connect the power pack if necessary.
3 Switch on the meter with the <On/Off> key.
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD.
1 Status information
2 Measured value (with unit)
3 Measured parameter
4 Sensor symbol
(calibration evaluation)
4
5 Measured temperature (with unit)
5
6 Further status information
6
7 Softkeys and date/time
7
1 Digital sensors (IDP)
(pH, conductivity, D.O.)
2 USB B interface (device)
3 Connection for line adaptor
4 Service interface
4
3
EN
English
5