Lexon TAMO Mode D'emploi page 5

EUROPEAN UNION
CE DIRECTIVE
This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
All essential radio test suites have been carried out. This restriction will be applied to all Member States of
European Union.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable
exposure conditions without restriction.
Declaration of Conformity
Hereby, LEXON declares that the product type LA131 is in compliance with Directives 2014/53/EU & 2011/65/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://www.lexon-design.com/assets/certifications-ce-tamo.pdf
UK CONFORMITY ASSESSMENT
The device is in compliance with the essential requirements and other relevant provisions of the UK Radio
Equipment Regulations SI 2017:1206 (as amended).
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable
exposure conditions without restriction.
Declaration of Conformity:
Hereby, LEXON declares that the product LA131 is in compliance with the following Regulations: Radio
Equipment Regulations 2017, Electrical Equipment (Safety) Regulations 2016 and The Restriction of the Use of
Certain Hazardous Substances in Electrical and Electrical Equipment 2012. The Full test of the UK declaration of
conformity is available at the following internet address: https://www.lexon-design.com/assets/certifications-uk-
ca-tamo.pdf
WPT:
RX Frequency Range: 110-148 KHz
Bluetooth:
Transmitter power: 4.59dBm(for EU/UK only)
RX Frequency Range: 2400-2480MHz
DISPOSAL AND RECYCLING INFORMATION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies:
electrical and electronic devices may not be dis-posed of with domestic waste. Consumers are obliged by law to
return electrical and electronic device at the end of their service lives to the public collecting points set up for this
purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on
the product, the instruction manual or the package indicates that a product is subject to these regulations. By
recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to
protecting our environment.
USA - FCC STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Notice:
Any changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
RF exposure statements
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
CANADIAN COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two
conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including interference that may cause undesired operation of the
device.
This Class B digital apparatus complies with Canadian ICES-003.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the
device.
RF exposure statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable
exposure condition without restriction.
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS) d'Innovation,
Sciences et Développement économique Canada. Le fonctionnement est soumis aux deux conditions suivantes:
Cet appareil ne doit pas causer d'interférences.
Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de provoquer un fonctionnement
indésirable de l'appareil.
Déclaration d'exposition RF:
L'appareil a été évalué pour répondre aux exigences générales d'exposition aux RF. L'appareil peut être utilisé
dans des conditions d'exposition portable sans restriction.