Publicité
Les langues disponibles
Les langues disponibles
Should you have any problem(s) with your vacuum cleaner, review the table
below for solutions to minor performance issues.
WARNING
Disconnect electrical supply before performing maintenance to the spot cleaner.
Failure to do so could result in electrical shock or personal injury.
PROBLEM
The spot
cleaner is not
operational.
Poor pick-up
performance.
Water escapes
from the spot
cleaner.
TROUBLESHOOTING
POSSIBLE CAUSE
Unplugged at power outlet.
Defective power outlet.
The motor is damaged.
Dirty water tank is not installed
correctly.
Dirty water tank is full.
The suction hose is clogged.
Float valve is activated.
Dirty water tank is full.
Dirty water tank is not installed
correctly.
Clean water tank is not installed
correctly.
Plug in firmly to suitable power outlet.
Check with a good appliance. Be sure
the power cord plug is fully plugged
into an electrical outlet.
Have the damaged part checked by
qualified personnel or contact the after
sales helpline 1-866-384-8432.
Check the dirty water tank for correct
installation. Ensure it is installed in
place.
Empty the dirty water tank.
Clean the hose.
Empty the dirty water tank.
Empty the dirty water tank.
Check the dirty water tank for correct
installation. Ensure it is installed in
place.
Check the clean water tank for correct
installation. Ensure it is installed in
place.
-21-
SOLUTION
Publicité
