Uni-bond E-912A Mode D'installation

Wire Colour Function
White Power
Black Ground
Brown Pattern Selection
Surface Mount: 2 Holes @ 3" centres •
1.0 Pattern Selection
- Tap brown wire to white wire (Power) momentarily to change patterns (see Flash Patterns)
To return to pattern NO. 1, touch brown wire to white wire (Power) quickly 3 times.
-
1.1 Flash Patterns
NO.
1 Random Patterns
2 Steady Light
3 Single Flash
4 High Intensity Flash
5 Double Flash
6 Triple Flash
7 Quad Flash
8 Quint Flash
9 8-Flash
10 Single Flash / Quad Flash
11 Single Flash / High Intensity Flash
12 Single / Triple / Quint Flash
2.0 Suggested Switch Connection
Battery Ground
Ground
Power
Pattern Selection
For more information, visit our website at: www.unibondlighting.com
INSTALLATION MANUAL
Light should be fused with 5 Amp Fuse (
Flash Patterns
(switches sold separately)
E-912A LED Warning Lights
Connect To
+12/24 VDC (Power)
-
(Ground)
+12/24 VDC (Power)
SAE
Class 1, CA13
Class 1
Class 1
Class 1
Class 1
Class 1
From Battery Positive
Jumper Wires
Switch #1
ST307
(OFF-ON-Momentary ON)
For Synchronizing 2+ Lights
(
refer to Synchronization Manual
Last Updated: 09/22/2022
)
ATM05 sold separately
)