Jet JCDC-3 Instructions De Fonctionnement page 16

9.2 Performance problems
Symptom
Poor performance; lack
of suction.
Excess dust or large
chips backing up into
canister filter.
Possible Cause
Hose improperly secured at dust
origination point.
Inlet port is open.
Collection bag is full.
Collection drum not sealed properly.
Canister filter is dirty.
Wood has excess moisture content.
Obstruction in dust hose or inlet port.
Dust hose too long.
Collection drum not sealed properly.
Collection bag full.
16
Correction
Inspect and remedy.
Cap unused inlet ports.
Empty bag (check sight window).
Inspect drum for leaks, make sure lid is tight.
Clean filter.
Use lumber with lower moisture content.
Inspect and clear obstruction.
Move collector closer to dust source.
Inspect drum for leaks, make sure lid is tight.
Empty bag (check sight window).