HAMPTON BAY GC-8742-SRP Guide D'utilisation Et D'entretien page 16

Assembly
1
Attaching the table legs
NOTE: Please ensure the bolts are assembled correctly
and use the M6 wrench (EE) to tighten.
□ Attach the four legs (B) to the leg connector (C) using
the M6x15 hex bolts (BB) and washers (CC).
□
Cover the bolt heads with caps (DD).
C
B
3
Positioning the table
□ Turn the table over and set it down on its legs.
□ The table is now ready for use.
2
□
□
DD
BB
CC
4
Attaching the table top
Place the table top (A) on a soft, flat non-abrasive surface.
Attach the table legs (B) to the table top (A) with the M6x20 hex
bolts (AA) and washers (CC). Tighten all bolts and cover the
heads with caps (DD).
NOTE: Please ensure the bolts are assembled correctly
and use the M6 wrench (EE) to tighten.
A
DD
AA
CC