Publicité
SIM Card: How to Install the SIM Card
1
2
1. Firstly release the screw and then remove
2. Insert a SIM card to the SIM card slot.
the SIM card slot cover.
SIM1 (Upper Slot):
When inserting the SIM Card to the upper
slot, make sure the notch on the SIM card
is oriented with the gold contacts face down.
Desk Mounting: How to Install the Desk Mounting Bracket - iEP(F)-9030 Series
iEPF-9030S Series
iEP-9030E Series
1. Attach the two desk mount brackets to the iEP(F)-9030
Series and secure them with four screws.
SO-DIMM Slot: How to Install the Memory Module
如何安裝記憶體模組 / So installieren Sie die Speichermodule / Comment installer les modules de mémoire / Come installare i moduli di memoria /
Cómo instalar los módulos de memoria /
/ Como Instalar os Módulos de Memória / 메모리 모듈/ メモリモジュール
1. Carefully insert the SO-DIMM memory
2. Push down until the module snaps into place.
module into the slot at a 30-degree angle.
Hard Drive: How to Install a 2.5" Hard Drive to the Hard Drive Tray (Default Qty is one piece.)
1. Place a 2.5" HDD into the tray with the printed
circuit board side facing down.Carefully align
the mounting holes in the hard drive and the tray.
Upper Slot (SIM1)
SIM2 (Lower Slot):
When inserting the SIM Card to the
lower slot, make sure the notch on the
SIM card is oriented with the gold
contacts face up.
iEPF-9030S Series
iEP-9030E Series
2.
en you can attach the iEP(F)-9030 Series to any
horizontal surface.
2. Secure the hard drive using four
3. Slide the drive tray into the HDD bay until
screws.
the drive is fully seated.
4. Push in the locking lever to lock the HDD
tray into place.
Rubber Foot: How to Install the Rubber Foot - iEP(F)-9030 Series
Lower Slot (SIM2)
iEPF-9030S Series
1. Attach four rubber foots to the iEP(F)-9030 Series and
secure them with four screws.
M.2 SSD: How to Install the M.2 SSD
如何安裝 M.2 / SSD So installieren Sie die M.2-SSD / Comment installer le SSD M.2 / Come installare l'unità SSD M.2 / Cómo instalar el disco de estado sólido M.2 /
Dimension of the iEPF-9030S Series
with Desk Mounting Bracket Installed
237mm
162mm
1. Locate the M.2 slot on the motherboard.
M.2 SSD: How to install the M.2 Pad and Heatsink
Dimension of the iEP-9030E Series
with Desk Mounting Bracket Installed
237mm
162mm
1. Remove protective lms on both sides
of the three thermal pads, and apply
the pads onto each of the three chokes.
Position of the iEP(F)-9030E/S Series
iEP(F)-9030E/S 系列擺放 / Positionen der iEP(F)-9030E/S Series / Positions de
la série iEP(F)-9030E/S / Posizioni della iEP(F)-9030E/S Series / Posiciones de la
iEP(F)-9030E/S Series /
iEP(F)-9030E/S Series / iEP(F)-9030E/S Series 시리즈의 위치 /
iEP(F)-9030E/S シリーズの位置
e iEP(F)-9030E/S Series should be placed in vertical position only.
3
4
iEP-9030E Series
iEP-9030E Series
2.
surface.
M.2 / Como Instalar o SSD M.2 / M.2 SSD를 설치하는 방법 / M.2 SSD の取り付け方法
2. Carefully insert the M.2 SSD into the
the slot at a 30-degree angle.
2. Align the M.2 heatsink to the three screw holes
on the right panel, and secure it with three screws
(#6-32 x 5 countersunk screws * 3pcs) from the
outside of the chassis.
Recommended Torque Table
iEP(F)-9030E/S Series / Posições de
Items Secured to Chassis
Chassis & Top Case/Heatsink
Rubber Foot
Desk Mount
2.5" Tray and 2.5" Device
CPU Socket
Items Secured to PCBA
Device: M.2 Module
Phoenix DC in & IGN
CPU Socket
iEPF-9030S Series
iEPF-9030S Series
iEP-9030E Series
en you can put the iEP(F)-9030 Series onto any horizontal
3. Tighten the screw to secure the M.2 SSD
to the motherboard.
Screw Driver Recommended Torque Value
Value (Kgf-cm)
3.0 + / - 0.5
3.0 + / - 0.5
3.0 + / - 0.5
3.0 + / - 0.5
3.0 + / - 0.5
Value (Kgf-cm)
2.0 + / - 0.5
2.0 + / - 0.5
3.0 + / - 0.5
Publicité
