DeLOCK 90435 Mode D'emploi page 3

English
Safety instructions
• Protect the product against moisture
• Avoid anti-static electricity when installing the card
Hardware Installation
1.
First, install the M.2 SSDs onto the PCI Express card.
2.
Turn off your PC and unplug the power cord.
3.
Open the housing.
4. Remove the slot holder from the available PCI Express slot.
5. Insert the card straight and carefully into the free PCI Express slot, until it is
well seated.
6.
Use a screw to attach the card to the housing.
7.
Reattach the housing and connect the power cord to the AC adapter.
Driver Installation
1. When the installation of the device is finished, the driver will be automatically
installed after you restart the computer.
2.
You can now start to use the device.
Installation SATA devices
1. It is possible to connect up to five SATA devices to the card. A combination of
SATA devices and M.2 SSDs is also possible.
2.
Insert the adapters into the corresponding slot on the card and fasten it with
a screw.
3.
Then you can connect the SATA cables with the adapters on the PCIe card
and your SATA device.
-3-