Casselin GN 1/1 Mode D'emploi page 16

7. OPERATING FLAW
ANOMALY
The machine does not work, the
lamp heater does not turn on.
The unit is on but does not heat.
The lamp heater remains off.
The required temperature is
reached.
The heating element stops
after a while.
NOTE
Malfunctions mentioned above are cited for information only and remain virtual. For any hesitation, contact
your dealer.
CAUSES
> The power cable is unplugged.
> The power fuse is tripped.
> The power supply box does not
work.
> The safety thermostat has tripped.
> The safety thermostat is damaged.
> The safety thermostat is turned on.
> Resistance longer works.
> Contact the damaged heater.
The thermostat is damaged.
The safety thermostat is started.
EXPLANATION
> Plug the power cord properly.
> Check all your fuses.
> Check the location of housing.
> Press the reset button in the
casing.
> Contact your dealer.
Contact your dealer.
Contact your dealer.
Press the Reset button in the
distribution box.
EN