Télécharger Imprimer la page

HIGHONE 12S47 E W929C Consignes D'utilisation page 45

Publicité

Les langues disponibles

Les langues disponibles

C
Troubleshooting tips
Before calling for service
Reviewing the charts on the following pages may save you from calling for service
Problem
Dishwasher doesn't start
Water not pumped from
dishwasher
Useful information
Possible causes
Fuse blown, or the circuit
break tripped.
Power supply is not turned
on.
Water pressure is low
Door of dishwasher not
properly closed.
Twisted or trapped drain
hose.
Filter clogged.
Kitchen sink clogged.
38
• Replace fuse or reset
circuit breaker.
• Remove any other
appliances sharing the
same circuit with the
dishwasher.
• Make sure the dishwasher
is turned on and the door is
closed securely.
• Make sure the power cord
is properly plugged into the
wall socket.
• Check that the water
supply is connected
properly and the water is
turned on.
• Make sure to close the
door properly and latch it.
• Check the drain hose.
• Check the filter system.
• Check the kitchen sink
to make sure it is draining
well. If the problem is
the kitchen sink that is
not draining, you may
need a plumber rather
than a serviceman for
dishwashers.
EN
What to do

Publicité

loading

Ce manuel est également adapté pour:

976766