1. Press
to select from the 10 preset Shows in the following sequence:
Show#1: Steady Glow
Show#2: Multi-speed Fading
Show#3: Multi-speed Blinking
Show#4: Chasing
Show#5: Shooting Star
Show#6: Stacking
Show#7: Sparkle
Show#8: Cross Wave
Show#9: Alternating
Show#10: Combo
Press once after Show#10 to turn off the product.
* If you unplug and reconnect the product to power, the product will
replay the last Show you've chosen.
2. Press
to select from the 4 preset timer settings:
a. Setting 1: 4 hours ON and then 20 hours OFF (LED in Green)
b. Setting 2: 6 hours ON and then 18 hours OFF (LED in Blue)
c. Setting 3: 8 hours ON and then 16 hours OFF (LED in Red)
d. Setting 4: OFF (LED in Yellow)
* The LED Timer Indicator of the product will constantly be on.
* The LED light on the remote control will blink 5 times in red before turning off.
3. The Timer will reset after each Show/Timer selection, and after you unplug and
reconnect the product to power.
Battery Replacement
1. To place/replace batteries, open the cover.
2. Insert two AAA-size batteries (not included) into the compartment.
3. Close the cover.
WARNING:
• Insert batteries with correct polarity (+/-).
• Use ONLY AAA size (LR03) batteries.
• For longer battery life, use alkaline batteries.
• WARNING: CHOKING HAZARD - AAA BATTERIES ARE SMALL PARTS,
KEEP AWAY FROM CHILDREN.
• Do not expose light set to moisture.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (Carbon - Zinc), lithium, or rechargeable
(NiCd, NiMH or other type) batteries.
• Remove batteries when not used for an extended period of time, or when depleted.
• Dispose of used batteries properly.
• Dry wipe with a cloth to clean the battery contacts prior to battery installation.
• DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
Fuse Replacement:
1. Grasp the plug and unplug the product from power. Do not unplug by pulling on the cord.
2. Slide open the fuse cover and remove the blown fuse carefully.
3. Insert the included spare fuse.
Risk of fire: replace only with 10 Amp 125 Volt fuse provided with the product.
4. Slide close the fuse cover.
FUNCTIONS
MAINTENANCE
Battery Cover
OWNER'S MANUAL
LED
Function
Timer
2 x AAA batteries (not included)
SPARE FUSE
LED
3