SULION CLOE M Mode D'emploi page 13

Preparing for setup
Note: The estimated Setup time is 120 minutes. This product must
only be installed by a certified electrician.
Remove the fan from the packaging carefully, avoiding the use
of knives which could scratch any part of it.
Remove all the components. Place the motor on a cloth or soft
surface so as not to damage its surface finish.
Carefully handle the unit to make sure that its casing does not
bend or get scratched.
The fan must be mounted on the floor or a large enough table
to prevent any component from falling off.
Remote control
Turn off
the light
Speeds //
Turn on the fan
Change light
intensity
Nature wind
ATC: 91 674 94 81 - info@sulion.es / SAT: 91 674 94 83 - sat@sulion.es
The button on the remote control allows you to change the
direction of rotation of the fan, summer and winter mode.
Summer option/down - he downwards air current creates
a refreshing effect as indicated in diagram A.
Winter option/up - An ascending air current pushes hot
air away from the fan area near the ceiling, as indicated
in diagram B. This allows you to use less central heating..
Summer/
Winter
Turn off the fan
Change color
temperature //
schedule has been selected, it will be cancelled.
Turn on the light
Timer
speed automatically, generating a breeze effect. To link this
function, the fan must be previously turning at a certain
speed.
Pressing any button afterward will override this feature.
Rotation direction: summer and winter
Timer: If any button is pressed after a shutdown
Nature wind: Increase and decrease the fan
13
www.sulion.es