MAGICKWOODS Elements BWB18 Instructions D'assemblage page 8

Step 11
Place the bumpers on the pull-out door as shown.
BUMPER
x4
Step 12
Fully extend the left and right slides and place the drawer box assembly on top. Ensure the slides
are lined up with the grooves on the bottom of the drawer box. Push the drawer box swiftly and
firmly into the cabinet box to attach slides and drawer box as demonstrated in the diagram.
If the box does not attach, remove and repeat the process. If needed, pull out door adjustment
instructions are available on page 9.
Drawer maximum load capacity is 65 lbs.
INSERT
DRAWER
ENJOY YOUR
NEW CABINETS
Need assistance? Contact us at 1.833.748.4846.
8