Publicité
Les langues disponibles
Les langues disponibles
Installation
1
Connecting The Wires
□
Attach the ground wire (G) to the ground screw or
ground wire (green/yellow) inside the junction
box (H).
□
Use the mounting screws (FF) to fix Crossbar (CC)
to the junction box (H).
□
Using the wire connectors (BB) connect the white
wire of the fixture with the white wire of junction
box (H) and the black wire of the fixture with the
black wire of the junction box (H).
3
Installing The Light Bulb
□
Install the light bulb (I). Do not exceed the
specified wattage. (60 W max.)
□
Turn the power on and check operation.
2
Installing the Lantern
□
Install the lantern to the junction box (H) by
aligning the holes on the canopy to the
mounting screws (FF) on the Crossbar (CC)
arm.
□
Secure in place with the lock nuts (AA)
and washers (B).
WARNING:
4 feet above the ground.
CAUTION:
completely around where back canopy meets the wall
surface to prevent water from seeping into the
junction box.
WARNING:
the GFCI box during raining days, always keep the GFCI
box as indicated on page 4.
5
Please contact 1-877-527-0313 for further assistance.
FF
The lantern must be installed at least
With silicone caulking compound, caulk
In order to avoid water accumulated in
HAMPTONBAY.COM
Publicité
