Ultra Carbon X5 Manuel D'utilisateur page 3

|
JÐ Cooler Installation
Step 1
Apply the included thermal compound evenly
over the CPU surface.
Step 2
Remove the film from the bottom of the CPU cooler.
Step 3 Position the CPU cooler directly over the processor lining up the mounting brackets with
p the retention clips on the motherboard. Use insulation pads (W3) after the cooler is
mounted and secure the cooler with the spring loaded screws.
Step 4
Wiggle the CPU cooler to ensure it is sufficiently
locked in. There should be minimal play in the
cooler after it has been installed.
>> > Fan'installation
1, Slide the rubber fan mounts into all four corners of the CPU cooler
2. Pull the ends of the rubber fan mounts through the fans screw holes.