Publicité
Les langues disponibles
Les langues disponibles
6. Gently dettach the mounting template and turn it 180
degrees. Locate the template against the centerline to
make the other pilot holes.
7. Mount the duct cover bracket on the top of the ceiling
using four 5 x 45 mm screws. Ensure that the
bracket is level.
8. Insert the complete duct cover at an angle and swivel
toward the wall.
Carefully pull the top part of the extension upwards.
Screw the left and right sides of the extension to the
mounting bracket with the supplied 4,2 x 8 mm screws.
9. From inside of hood, screw the supplied 4,2 x 8 mm
sheet metal screws through the holes on each side
and along the front into bottom of the extension.
Page 5
Publicité
