Publicité
Liens rapides
Installation guide
Eng
Guía de instalación
E
Guide d'installation
F
The door controller reads the encrypted
data contained on the carrier and allows
for updating of the carrier via SALTO Virtual
Network technology, making it possible to
cancel lost or stolen cards remotely.
It is equipped with input connections that
permit third party readers integration.
CU42E0
00
T
CU42E0
CU42E0
G
00
226g
600g
CU4200
T
00
CU4200
CU4200
00
G
190g
570g
Mechanical Installation
Eng
CU42E0T - CU42E0G - CU4200T - CU4200G - CU42E0T00 - CU42E0G00 - CU4200T00 - CU4200G00
1
TAMPER
Connect!
Note: Follow the same connection model, using the CU tamper input, when using a third party electric box equipped with a
tamper opening detection.
Nota: Seguir el mismo modelo de conexión, utilizando el tamper input de la CU cuando se utiliza una caja eléctrica de
terceros equipada con un tamper de detección de apertura.
Remarque: Suivez le même modèle de connexion en utilisant l'entrée sabotage CU, lorsque vous utilisez un boîtier électrique
d'une tierce partie équipée d'une détection d'ouverture de sabotage.
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any
item in this catalog, its design, construction, and/or materials.
Installation guide
XS4 Controller
Instalación mecánica
E
2
Note: To override the wall tamper, place the jumper in OFF position.
ON
OFF
XS4 Controller
104
(4-1/8")
44
(1-3/4")
Model: CU4200
Power Input: 12V -1A
DC
12V
Input
B
ON
DC
GND
A
READER 1
12V
Output (1A)
DC
GND
A
B
BUS485
B
A
READER 2
+
TAMPER
-
+
NC
IN1
-
RL1
C
+
NO
IN2
-
NC
+
RL2
C
IN3
-
NO
+
NC
IN4
-
RL3
C
+
NO
IN5
-
NC
+
RL4
C
IN6
-
NO
Ethernet
10Base-T
100Base-TX
©
2022 SALTO Systems S.L.
CU42xx.. series
43
(1-11/16")
10
(3/8")
Installation mécanique
F
1/20
224901-ED.4- 05/10/2022
Publicité
Manuels Connexes pour Salto CU42E0T00
Sommaire des Matières pour Salto CU42E0T00
- Page 1 Mechanical Installation Instalación mecánica Installation mécanique CU42E0T - CU42E0G - CU4200T - CU4200G - CU42E0T00 - CU42E0G00 - CU4200T00 - CU4200G00 TAMPER Connect! Note: Follow the same connection model, using the CU tamper input, when using a third party electric box equipped with a tamper opening detection.
- Page 2 100Base-TX (2A-30VDC). Use the provided varistor if an inductive load is used. Ethernet connection (only CU42E0). Tamper input to connect the tamper signal from the SALTO electric box or other compatible devices. conectado en paralelo a la entrada del tamper.
- Page 3 Sortie TX R1=R2 XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 3/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Page 4 Note 5: Si connectique Ethernet XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 4/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Page 5 Cerradero eléctrico Rojo Rouge Load Power Supply Etat de la porte NC SALTO recommends always using an external power supply to operate the load. Bouton poussoir NO Gâche électrique Installation example with RJ45: Ejemplo de instalación RJ45: Exemple d’installation avec connecteur RJ45 :...
- Page 6 Check that the readers LEDs are ON (READER 1, READER 2). 2. Perform the set up in the software (Consult SALTO ProAccess SPACE user guide). Set up all the CU4200s with their dip-switches and assign the IP address to the CU42E0.
- Page 7 3.2.2. Acceder a la dirección IP 192.168.0234 con un explorador estándar. Configurar los parámetros de red y pulsar el botón 'send' en cualquier momento (sin guardar los cambios) pulsando el botón de CLR durante 5 segundos. 4. Usar el Software de SALTO para detectar el dispositivo consultar el manual de usuario de SALTO ProAccess Software). XS4 Controller All contents current at time of publication.
- Page 8 Vérifiez que les LEDs des lecteurs son allumées (READER 1 et READER 2). 2. Définir la configuration dans le logiciel (Consultez le mode d'emploi ProAccess SPACE SALTO). Configurer toutes les CU4200s en fonction des Dipswitchs et attribuer l'adresse IP à la CU42E0.
- Page 9 Nombre maximum d'appareils sur un BUS485: 16 unités, avec un maximum de 4 unités CU4200 et 15 unités CU4EB8. XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 9/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Page 10 OFF : le relais est inactif (NC est relié à C) XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 10/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Page 11 Mechanische installation Mechanische installatie Mekanisk installation CU42E0T - CU42E0G - CU4200T - CU4200G - CU42E0T00 - CU42E0G00 - CU4200T00 - CU4200G00 TAMPER Connect! Hinweis: Befolgen Sie das gleiche Anschlussprinzip des Sabotageeingangs der CU, wenn Sie ein elektrisches Gerät eines Drittanbieters verwenden, das mit einer Sabotageüberwachung ausgestattet ist.
- Page 12 Nätverksanslutning (endast CU42E0) 100Base-TX XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 12/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Page 13 TX utgång R1=R2 XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 13/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Page 14 Grün Groen Grön Weiß LOAD Schwarz Zwart Svart Rood Röd Load Power Supply SALTO recommends always using an external power supply to operate the load. Installationsbeispiel RJ45: Installatie voorbeeld RJ45: Installationsexempel RJ45: Optioneel SP224861 Optioneel SP224895 Facultatief Facultatief Valfritt Valfritt...
- Page 15 Not. 5: När nätverk skall användas XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 15/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Page 16 4.- Prüfen Sie in der ProAccess SPACE Software ob alle Komponenten korrekt erkannt wurden. Hierzu bei Bedarf das Handbuch zu rate ziehen. XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 16/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Page 17 Controleer of de LED bij lezers op ‘ON’ staan (READER1, Reader2). 2. Creëer de CU4200 reeks in de software (raadpleeg hierbij de SALTO ProAccess SPACE gebruikershandleiding. Configureer alle CU4200 met de juiste DIP-Switch instellingen en ken het IP adres toe aan de CU42E0 in de software.
- Page 18 3.2.3. CU42E0 kommer lämna adresseringsläget automatiskt, men det är möjligt att avsluta adresseringen utan att spara genom att trycka på CLR-knappen i 5 sekunder. 4. Använd SALTO ProAccess mjukvaran för att detektera enheten (Se manualen för instruktioner). XS4 Controller All contents current at time of publication.
- Page 19 Max antal enheter pa BUS485 Är 16st totalt, varav max 4st CU4200 och 15st CU42EB8. XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 19/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.
- Page 20 AV: Reläutgången är inaktiv (NC är ansluten mot C). XS4 Controller All contents current at time of publication. 224901-ED.4- 05/10/2022 20/20 SALTO Systems S.L. reserves the right to change availability of any © 2022 SALTO Systems S.L. item in this catalog, its design, construction, and/or materials.