Télécharger Imprimer la page

LENCO EPB-440BK Mode D'emploi page 3

Publicité

Les langues disponibles
  • FR

Les langues disponibles

* Those instruction are related only to products using power cable
or AC power adaptor.
Component:
1. Home-Key
2. LED indicator light
3. Power supply indicator lamp
4. Charger output
5. PowerKey
User manual
Power on:
Long press home key until the blue indicator light flash,
then you will hear voice prompt "power on".
Power off:
Long press Home-key until the red Indicator light on 2
second, then you will hear voice prompt "power off".
Connected:
Blue lights flash every 4 seconds
Coming calls:
Blue lights flash quickly.
Accept call:
Short press Home-key on Right earbud
press key once
Reject Call:
Press 1 sec. Home-key on Right earbud
Music:
Press home key once is PAUSE
Press 2 times Home key is NEXT song
Press 3 times Home key is PREVIOUS song
Re-connection:
Auto reconnect the paired phone when turned on
(some mobiles need to manual to reconnect on the phone)
Eartips: the product is delivered with 3 pairs of eartips.
It is very important that you select the right size of eartip fitting the
best your ears. Fore 2 reasons: the comfort and stability and also for
the quality of the sound: if you have the right size, the sound quality
will be the best: good bass and clear music. If the size is wrong, the
sound could be bad, flat, no bass.
6. Earbuds
7. Earphone Silicone
8. Charging Input
9. Conversation Hole
Bluetooth pairing
(dual headset):
1. Take the 2 earbuds out of the charging case and press "R" and "L"
Home-keys together for 1 second until blue light appear on each
earbud, then short red light. The blue light will shortly flashes
every 4 seconds to show that the earbuds are paired together.
2. First time pairing of the earbuds with your mobile phone. Long
press the Home-key of the "R" earbud until blue/red lights are
flashing alternatively. Activate the bluetooth on your mobile
phone and look for the Lenco EPB-440 device in the bluetooth
device list and select it. The blue/red light on the "R" earbud will
then stop flashing and your pair of earbuds are now connected
with the mobile phone. In the earbuds you can ear the voice
message "phone connected" and the blue led will flash every 4
seconds on each earbud while in use.
3. When you want to stop listening to your earphones, just long
press the right Home-key until red led is lighting, then the leds
will be OFF on both earbuds.
In the earbuds you can ear the voice message "power off".
How to wear:
The "L" earbud should be put in the Left ear and the "R" earbud in
the Right ear. The best position is to enter the earbud vertically into
the ear with the "L" and the "R" letter on top and turn each earbud
towards the back direction of the ear and try to find the position
where the earbud is not moving when you shake your head.
Charging the two earbuds
1. Put each earbud into the charging case. The charging is done by
3
= L
= M
= S

Publicité

loading

Ce manuel est également adapté pour:

Epb-440