Black & Decker BPW30MW Manuel D'instructions page 12

ENGLISH
SAFETY INFORMATION
UNPACKING AND REMOVING SHIPPING
MATERIAL
Remove the packing box and lift the washer up and away from the foam base
cushion. Open the lid of washer to take out all accessories including protection foam.
A plastic part labeled "for transportation only" is placed in the center of the
styrofoam for support. This should be discarded.
Packaging materials can be dangerous to children; Keep all packaging material
(plastic bags, polystyrene, etc.) well out of children's reach. Do not operate
this appliance on the foam base cushion. Failing to do so will result in serious
vibration.
Styrofoam may be broken during transportation or unpacking the unit. Make
sure to remove all Styrofoam the washer. It is important to check the bottom of
the washer to make sure there is not any remaining Styrofoam at the bottom of
the washer near the motor before operating the washer.
Page 12
Foam Base Cushion Protection Foam