witschi QuartzSensor Mode D'emploi page 2

QuartzSensor
QuartzSensor
• Compact and ergonomic measuring device for quartz watches or movements with inserted battery
• For analogue, LCD and tuning fork watches
• Capacitive and inductive sensors
• Sophisticated shielding minimises undesired interferences
• Measurement of rate deviation with and without inhibition
• USB interface for connection to a Windows PC, Windows tablet or the Terminal
• LED to indicates correct signal reception
• WiCoTRACE software with automated measurement sequences and a direct measurement mode
Rate measurement of analogue, digital and tuning fork watches
Motor pulses (pulse duration and chopping ratio)
Automated measurement sequences with WiCoTRACE
Direct measurement mode with numerical display
Direct measurement mode with graphical display
Detailed graphic display of the measuremet signal
Rate deviation via quartz frequency (32 kHz)
General
Display LED
Compatible Windows PC and tablet
display units Witschi Terminal
Interfaces 1x USB type A (Type C device)
Dimensions 50 x 56 x 102 mm (W x H x D)
Weight 83 g
Witschi Electronic AG
Bahnhofstrasse 26 | 3294 Büren an der Aare
Tel. +41 (0)32 352 05 00 | welcome@witschi.com
| Switzerland
| witschi.com
QuartzSensor
•
•
•
•
Measurement
Measurement Capacitive and inductive measurement
principle of the rate and motor pulses
Rate -300 to +300 s/d (± 0.03 s/d)*
Motor pulse 0 to 100% (± 10%)
Pulse duration 0 to 20 ms
Measuring conditions
Measurement time** 2 s ... 50 h
Time base TCXO (± 0.026 s/d)
Operating Temperature 10 to 40 °C
conditions Relative humidity max. 80 %
* if calibrated annually
** depending on the used software or display device
Technical specifications subject to
change without notice.
QuartzSensor PRO
•
•
•
•
•
•
•
33.23D41e | 05.01.2024